Skip to Main Content
Mobile Menu

Services

  • Fiscal Year 16 (July 1, 2015 - June 30, 2016)

    CATEGORY/
    Instrument
    SERVICE PROVIDEDBOISE STATE
    USER
    ACADEMICCOMMERCIAL
    MICROSCOPY
    Zeiss LSM 510
    Meta Confocal
    Microscope
    Instrument Usage
    and Training
    $ 41.15
    per hour
    $ 57.61
    per hour
    $ 150.00
    per hour
    MASS SPECTROMETRY
    LTQ-Velos System
    Tryptic Digestion
    and Protein
    Identification
    $ 67.49
    per sample
    $ 94.49
    per sample
    $ 200.00
    per hour
    MASS SPECTROMETRY
    maXis Q-TOF
    System
    Protein molecular
    weight determination
    $ 38.33
    per sample
    $ 53.66
    per sample
    $ 160.00
    per sample
    MASS SPECTROMETRY
    maXis Q-TOF
    System
    Small molecule
    identification by
    direct infusion
    $ 32.79
    per sample
    $ 45.91
    per sample
    $ 125.00
    per sample
    MASS SPECTROMETRY
    maXis Q-TOF
    System
    Metabolites analysis 
    by LC-MS
    $ 40.03
    per sample
    $ 56.04
    per sample
    $ 175.00
    per sample
    MICRO-CT
    Skyscan 1172 Scanner
    Instrument Usage
    and Training
    $ 55.25
    per hour
    $ 77.35
    per hour
    $ 150.00
    per hour
    MASS SPECTROMETRY
    maXis Q-TOF System
    iTRAQ Protein Quantification$ 57.93
    per sample
    $81.11
    per sample
    $ 240.00
    per sample
    CELL AND TISSUE CULTURE
    Tissue Culture Suite*
    Use of Tissue Culture Suite$ 3.52
    per hour
    $ 4.93
    per hour
    $ 20.00
    per hour
    CELL AND TISSUE CULTURE
    Tissue Culture Service
    Subscription Fee$ 29.81
    per month
    $ 41.74
    per month
    $ 100.00
    per month
    CELL AND TISSUE CULTURE
    Tissue Culture Service
    Tissue Culture - Introductory Service$ 53.11
    training fee
    $ 74.35
    training fee
    $ 200.00
    training fee
    CELL AND TISSUE CULTURE
    Tissue Culture Service
    Cell Line and Expansion Banking$ 91.32
    per sample
    $ 127.84
    per sample
    $200.00
    per sample
    SPECTROSCOPY
    Jasco J-810
    Circular Dichroism Spectropolarimeter
    Instrument Usage
    and Training
    $ 12.10
    per hour
    $ 19.94
    per hour
    $ 40.00
    per hour

    *Current as of April 2014: Cost schedules for all equipment will be reviewed regularly and rates adjusted.

    The BRC has three Service Fee groups:
    Boise State University users – faculty, staff, students
    Non-Profit – Other Academic or Federally funded  user
    Commercial -Commercial for-profit entity users


  •  Confocal banner images Jan2013

    BRC Zeiss LSM Meta 510
    The Biomolecular Research Center’s Zeiss Microscope, LSM 510 Meta confocal imaging system is located in room 213 of the Mathematics building on the campus of Boise State University.  The Axiovert Observer Z1 inverted microscope has filter sets appropriate for DAPI, FITC and CY3/TRITC to view samples in a conventional widefield microscopy mode as well as the objective lens: 10x, 20x, 40x, 63x and 100x.  The LSM Meta 510 is configured with six excitation lasers lines (405, 458, 488, 514, 543 and 633 nm), two photomultipliers, a detector for bright field image acquisition and a polychromatic META detector capable of detecting many standard fluorophores, including DAPI, FITC, CFP, YFP, Rhodamine, TRITC, Cy3, Cy5, Texas Red  and many AlexaFluor dyes.  Excitation dichroics and emission filters are operated via the LSM software. Added accessories include a heated stage chamber and objective warmer from PECON for live cell experiments and an AxioCam MRm monochrome digital camera.

    Use and Management
    The purpose of this instrument is to support research at Boise State University and surrounding research facilities.  The instrument is managed by Raquel Brown. Users with substantial needs for the confocal microscope will be trained so they can use the system unassisted.  New users will have a 3-4 hour introduction that covers start-up, computer software introduction for basic confocal system operation, basic image manipulation, data storage, and clean-up/shut-down procedures. In a follow-up session, the potential user will demonstrate that he/she can safely and competently operate the instrument. With this, the user will have allowable unsupervised access to the instrument at the confocal system hourly rate. There will be a discounted hourly rate available for long-term experiments that utilize the scope after hours.
    Users, who have simple or solitary studies and who do not want to be formally trained can elect to have the system operated by Raquel while providing investigator feedback for the price of confocal hourly rate plus a consulting fee.

    LabImaging Software on Monitor

    [table “2” not found /]

    Contact Information
    Raquel Brown
    BRC Manager/Confocal Microscope System
    (208) 426-2125
    rbrown@boisestate.edu

    Publications and presentations utilizing data from samples imaged with the  Zeiss LSM Meta 510 confocal microscope should include the following acknowledgement:  “This research  was made possible by the INBRE Program, National Institutes of Health Grant NOs: P20 RR016454 (National Center for Research Resources) and P20 GM103408 (National Institute of General Medical Sciences) and the National Science Foundation Grant NO: 0619793. “

  • JascoImage

    The Jasco J-810 Spectropolarimeter (163-900 nm) is a hybrid instrument consisting of a variable wavelength polarimeter and absorption spectrophotometer. It is designed to allow secondary structure determination by circular dichroism; specifically measuring the left-and right-handed circularly polarized light of optically active molecules.  It is equipped with an equipped with a computer-controlled Peltier device (3-90 °C) and a two-syringe titrator to assess thermal/chemical stabilities of proteins/ polypeptides or to monitor ligand binding and  is controlled by Jasco’s Spectra Manager software.

    CD applications include:

    • Determination of optical purity
    • Estimation of protein and nucleic acid conformation
    • Determination of the conformational changes of protein and nucleic due to molecular interactions
    • Structural comparison between wild-type and mutant proteins
    • Determination of the thermodynamically dependent folding and unfolding of proteins and nucleic acids
    • Determining the binding constants
    • Kinetics of folding and unfolding of macromolecules
    • Thermodynamic parameters from temperature dependencies of CD signals

    Use and Management
    The purpose of this instrument is to support research at Boise State University and surrounding research facilities.  First-time users please contact the BRC for information on training and access requirements. Qualified users will be able to book instrument time and use the instrument independently.

    Boise State University users – faculty, staff, students
    Non-profit – Other academic or federally funded users
    Commercial – For profit users

    [table “8” not found /]

    Circular Dichroism References:

    UCI Department of Chemistry Introduction to circular dichroism
    Circular Dichroism_Greenfield 2004
    J-810 Series Hardware Function Manual

  • BRC Mass Spectrometry Banner

    Welcome to the BRC Mass Spectrometry Facility!

    Our mission is to provide a wide range of analytical capabilities through fee-for-service in the areas of protein, biological and small molecule research to Boise State University investigators, external academic and industrial partners. If you have any questions regarding our services or wish to know more about mass spectrometry, its capabilities and applications, please contact us:

    Xinzhu Pu, PhD
    Mass Spec Facility Manager
    1910 University Drive
    Boise, ID 83725-1511
    Phone: (208)4262233
    Email: shinpu@boisestate.edu

    Instrumentation
    Fees
    Services


    Instrumentation

    The Biomolecular Research Center currently has two mass spectrometers; a Bruker Daltonics maXis Quadrupole Time-of-Flight, Thermo Scientific Velos Pro Dual-Pressure Linear Ion Trap.  Both instruments are located in the BRC, room 215 in the Mathematics Building.

    Bruker Daltonics maXis Quadrupole Time-of-Flight (Q-TOF) Mass Spectrometer

    Bruker QTOFThe Bruker Q-TOF Mass Spectrometer is a hybrid tandem mass spectrometer with outstanding performance including fast acquisition rate (up to 30 Hz for small molecules, up to 5Hz dynamic for peptides), high resolution (50,000 Full Sensitivity and Resolution), high resolution EIC (0.5 – 1mDa on typical LC peaks), and  excellent sensitivity (1 pg Reserpine >100:1 S/N RMS). This mass spectrometer is coupled with a Dionex Ultimate 3000 HPLC system and an innovative Captive electrospray source. In combination with software tools, including Bruker Compass Data Analysis, Smartformula, ProteinScape, Mascot protein search engine, and Profile Analysis, we use this LC-MS system in small molecule identification, metabolomics analysis and protein characterization.

    Publications and presentations utilizing data from samples analyzed with the Bruker maXis Q-TOF  Mass Spectrometer should include the following acknowledgement:  “This research  was made possible by the National Science Foundation Grant NO: 0923535.”

    Thermo Scientific Velos Pro Dual-Pressure Linear Ion Trap (LIT) Mass Spectrometer

    Velos LIT_2The Themo Scientific Velos Pro Linear Ion Trap Mass Spectrometer offers Trap-HCD (Higher-Energy Collisional Dissociation) combined with CID (Collision-Induced Dissociation), and PQD (Pulsed-Q Dissociation) to enhance coverage and sensitivity of proteomic analysis. An Easy nLCII nano liquid chromatographic system is coupled to the mass spectrometer through a nanoelectrospray source for protein characterization. In combination with the Thermo Proteome Discoverer 1.3, Sequest and Mascot database search engine, this LC-MS system is our work horse for routine proteomic analysis.

    Publications and presentations utilizing data from samples analyzed with the LTQ Velos Mass Spectrometer should include the following acknowledgement:  “This research  was made possible by the INBRE Program, National Institutes of Health Grant NOs: P20 RR016454 (National Center for Research Resources) and P20 GM103408 (National Institute of General Medical Sciences),  by the Idaho State Board of Education’s Higher Education Research Council (HERC) and the Biomolecular Research Center at Boise State University.


    Fees

    We charge for every sample run, regardless of whether an expected result is obtained. The only exception is if the lack of result is caused by human errors or instrument problems in the mass spec facility.

    Analyses are charged at the rates listed below per sample submitted:

    ServicesBSU UserExternal non-profit usersExternal for-profit users
    Tryptic Digestion and Protein Identification (gel band/slice or simple protein mix in solution)$67.49$94.49$230.00
    Protein molecular weight determination$38.33$53.66$160.00
    Small molecule identification by direct infusion$32.79$45.91$150.00
    Metabolites analysis
    by LC-MS
    $40.03$56.04$175.00
    iTRAQ protein quantification by LC-MS$57.93$81.11$240.00

    Services

    Tryptic Digestion and Protein Identification
    Protein molecular weight determination
    Small molecule identification by direct infusion
    Metabolites analysis by LC-MS

    We currently provide the mass spectrometry analyses listed below. If you have needs which are not listed below, please contact us to discuss your project with our staff. We will do our best to help you get your research done!

    Mass spectrometry is a powerful tool in protein and metabolite identification and quantification. However, just like many other analytical tools, it has limitations and there are many factors that will affect the results.  We strongly encourage our users to discuss their projects with our facility staff before they submit samples for analysis. We would like to discuss if mass spectrometry is a suitable for your project, the best mass spec workflow for your specific needs, and how to prepare your sample for mass spec analysis. To ensure the success of analysis, samples must be prepared in a way that is compatible with mass spec. Please follow the sample preparation guide to prepare your samples for mass spec analysis.

    Tryptic Digestion and Protein Identification

    Protein identification by tandem MS after protease digestion is a robust tool in proteomics with high successful rates. Samples can be visible bands excised from Coomassie blue or silver-stained gels. Silver staining must be performed with mass-spec compatible reagents, e.g. Pierce Silver Stain Kit for Mass Spectrometry, catalog # 24600. We may refuse submissions stained using MS incompatible methods. We also accept samples in solution which contains purified protein or several proteins. Please contact facility staff before you prepare your sample for in-solution digestion because some of the chemical commonly used in protein extraction are detrimental to mass spec. For complex samples, fractionation is usually required, for example, SDS-PAGE or 2D gel electrophoresis. Protein samples will be digested with protease in gel or in solution and resulted peptides will be analyzed by tandem MS. Trypsin is the most commonly used protease and is the enzyme we routinely use. Some proteins may require other proteases, such as Lys-C, Asp-N, chymotrypsin, etc. If this is case, we can accommodate.

    Guideline for Preparing gel slice/band:

    • Electrophoresis
      • Try to use a 1 mm thick gel.
      • If possible, try using precast gels and pre-made electrophoresis running buffer.
      • We highly recommended to electrophorese a positive control such as BSA or some other known protein that stains to approximately the same level as your unknown protein of interest.
    • Band excision
      • Use a clean scalpel or razor blade (you may wish to first sonicate the blade for 5 min acetonitrile or ethanol in a glass beaker) to excise protein bands/spots of interest from the stained polyacrylamide gel. Excise only the stained part(s) of the band and trim off the non-stained gel as much as possible. Gel band/slice size should be no larger than 5mm in length.
      • Cut each gel slice into small pieces (~1 mm3) and transfer the pieces to a clean, sterile 1.5 mL microcentrifuge tube pre-rinsed with 50% organic solvent, such as methanol and acetonitrile.
      • Also excise and dice a gel piece from a protein-free region of the gel in parallel as a negative control, and your positive control (for example, BSA) if you ran it.
      • Close the tube as soon as your bands are inside. Submit sample to the Mass-Spec facility immediately or store gel slices at -20C for a brief period before submission.
    • Strategies to avoid Keratin contamination

    All humans are constantly shedding skin cells so there is a large amount of keratin in the air of labs, on surfaces, and in gel boxes, glassware etc. that have been left uncovered on benches. Large amounts of keratin in a sample can mask proteins of interest that are less abundant. Although human keratin contamination cannot be completely avoided, it is important to minimize it during each sample preparation step.  Cleanliness is the key. Here are some recommendations:

    • A key factor in avoiding keratin is to avoid contamination with dust particles. Start with a scrupulously clean work surface. If possible, for best dust control during sample prep work such as cutting gel bands or performing in-gel trypsin digestion, try working in a HEPA-filtered laminar-airflow hood. Wipe the inside of the hood and surface of plasticware packs with ethanol.
    • DO NOT handle anything that will come into contact with your protein with your bare hands! Always wear powder-free nitrile gloves (never use latex gloves, as natural rubber contains significant amounts of keratin and other proteinaceous materials). It may be necessary to wear protective clothing during all phases of sample preparation and to cover your head.
    • Try using precast gels, pre-made electrophoresis running buffer.
    • If casting your own gel:
      • Clean the gel plates well with a soapy sponge, rinsing well with ethanol (or bleach overnight).
      • Handle the plates by the edges and wear gloves to avoid transfer of keratin from your hands to the gel plates.
      • Before preparing solutions, wash the glassware well to remove any dust that might have accumulated during storage.
      • When staining gels:
        • Rinse the staining container well before beginning. Also, rinse the gel thoroughly at each stage. Keep the container closed to keep dust out.
        • When cutting gel bands:
          • This is the step where keratin contamination is most likely to occur. If possible, work in a laminar flow hood. Before starting, wipe down the work a wipe down the work area and any tools that will contact the gel band with an ethanol-soaked Kimwipe.

    Prepare sample for in-solution digestion

    Detergents are incompatible with mass-spectrometry and must be avoided. Failure to do so will contaminate the instrument and result in costly and time-consume maintenance and serious down-time for the instruments. Therefore we require users to contact facility staff before preparing in-solution sample for submission to ensure samples are free of mass spec incompatible reagents.

    • Do not use ANY detergents in ANY step of sample-prep. This includes, but is not limited to: SDS, CHAPS, NP-40, and Triton-X100 (or related).
    • If detergents and other reagents that are not compatible with mass spec must be used to extract protein, precipitation procedure, for example, acetone precipitation can be used to eliminate these interfering reagents.
    • Optimal sample quantity is 20 µg protein in ~20µL solution.

    Protein molecular weight determination

    Molecular weight determination of intact protein can be achieved by direct infusion via a syringe pump or Liquid Chromatographic (LC) – Electro Spray Ionization (ESI) on our Bruker maXis Q-TOF. A concentrated solution of desalted protein is sprayed into the instrument. . Ion signals that correspond to different charge states of the intact protein molecule are recorded. This data is then deconvoluted to obtained protein molecular mass, typically up to 200kDa, depending on the homogeneity of the sample.

    HPLC-MS is the recommended method because it removes salts and other interfering compounds and enhances signal to noise ratio. This is the method we routinely use to determine the molecular weight of intact proteins. However, non-covalent protein complexes cannot be measured with HPLC because they require 100% aqueous conditions at neutral pH value. In this case, direct infusion via a syringe pump is the method of choice.

    Sample preparation guide:

    • Samples should be free of detergents and viscous solvents, including DMSO, DMF, and THF.
    • Trifluoroacetic acid (TFA) suppresses ionization, and should be kept below 0.1%. Commonly used alternatives to high concentrations of TFA are mixtures of either 1% acetic or 0.1% formic acid with 0.025% TFA
    • Because LC cannot be used to desalt samples, non-volatile buffers should be avoided when analyzing non-covalent protein complexes. A recommended solvent for this sample type is 10 mM ammonium acetate solution in water. Other protein sample, the recommended solvent is 1% formic acid and 25-50% acetonitrile in water. Since LC will be used to clean up salts and other contaminants for this type of samples, non-volatile salts can present in the sample. However, concentration should be kept as low as possible.
    • Glycerol should be limited to no greater than 1%.
    • Sample concentration: Good results can be obtained with 2.5 µM at 5 kD, 5 µM at 20 kD, 10 µM at 40 kD, and 25 µM at 60 kD.
    • Sample volume: 20-50 µL for HPLC and 50-100 µL for direct infusion.

    Small molecule identification by direct infusion

    We provide accurate mass analysis of small molecules in relatively pure samples. This analysis will be carried out on our Bruker maXis Q-TOF.

    Sample preparation guide:

    • In general, volatile low MW protic solvents are preferred. Methanol or water-methanol solution is the typical dilution solvent. Isopropanol and acetonitrile-water mixtures are also acceptable solvents. Pure water or pure acetonitrile are not good solvents for electrospray ionization. If water is required for solubility, up to 50% water may be added. Try to use the highest purity solvents including water, preferably MS grade or HPLC grade.
    • High MW or viscous solvents should be avoided, including DMSO, DMF, and THF.
    • Hydrocarbon solvents, such as hexane and benzene, are not amenable to ESI.
    • Acetone may be used but is not preferred, as even high-grade acetone typically contains contaminants which show up as strong peaks in the MS, and may overwhelm the analyte signal.
    • If the sample contains TFA (e.g. from a reverse-phase HPLC run), remove the TFA by lyophilization or by drying down the sample overnight under high vacuum.
    • Please be sure to indicate if the compound is sensitive to acid or basic conditions, as small amounts of acid (formic, acetic) or base (ammonium hydroxide, triethylamine) are often added to samples in order to enhance ionization. This information will also help determine which MS polarity should be used.
    • In general, 50-100 µL of 1mg/ml sample is more than enough for analysis. Largely due to differences in the ionization efficiency, sensitivity for different compounds may vary. Our instruments are capable of detecting down to the 1 µg/mL level. However, it is good practice to submit around 1 mg/mL.
    • All samples must be filtered through 0.22 µM filter as the particles in sample may clog the spray needle.
    • Please specify if compound may become unstable under certain conditions.

    Metabolites analysis by LC-MS Instrumentation

    We provide quantitation of small molecular metabolites. This measurement is carried on our Bruker maXis Q-TOF coupled with a Dionex Ultimate 3000 LC.

    Sample Preparation for L-MS analysis of metabolites

    • Samples should be dissolved in water-miscible solvents. Optimal solvent is the one with similar strength to LC mobile phase at the start of the LC gradient. Try to use the highest purity solvents including water, preferably MS grade or HPLC grade.
    • High MW or viscous solvents should be avoided, including DMSO, DMF, and THF.
    • If the sample contains TFA (e.g. from a reverse-phase HPLC run), remove the TFA by lyophilization or by drying down the sample overnight under high vacuum.
    • Please be sure to indicate if the compound is sensitive to acid or basic conditions, as small amounts of acid (formic, acetic) or base (ammonium hydroxide, triethylamine) are often added to the LC mobile phase in order to enhance ionization. This information will also help determine which MS polarity should be used.
    • Sample volume: In general, 50-100 µL of sample is enough for analysis.
    • All samples must be filtered through 0.22 µM filter as the particles in sample may clog LC autosampler needle and column.
    • Please specify if compound may not be stable under certain conditions.

    Back to Top

  • Computer Animated Visualization Environment (mini-CAVE)

    MiniCave Hafez Jan2013Virtual Male Head in miniCAVE

     

    Contact Information
    Raquel Brown
    BRC Manager/Confocal Microscope System
    (208) 426-2125
    rbrown@boisestate.edu

    miniCAVE room

  •  Skyscan banner images Jan2013

    BRC Skyscan 1172 Micro-CT Scanner
    The Biomolecular Research Center’s Skyscan 1172 Micro-CT Scanner is located in room 213 in the Mathematics building on the campus of Boise State University.  The Skyscan 1172 scanner, with an X-ray source of 20-100V, 10W, <5 µm spot size or 20-80V, 8W, <8 µm spot size, has a fully distortion-corrected 11Mp X-ray detector that is a 12-bit cooled CCD fiber-optically camera coupled to scintillator.  The detail detectability of the Skyscan 1172 ranges from 0.8/1.0 µm (when operated at the highest resolution) to 25 µm. The Skyscan 1172 currently has two filter choices that can be set into 3 positions to allow for scanning high-density tissues such as bones to low-density softer tissue such as lung. The maximum object size, or field of view, is 50 mm in either diameter or height when scanner is run in offset mode. The Skyscan 1172 with dynamically variable acquisition geometry provides the shortest scan times possible at any magnification and cross-section images are generated in a wide range of formats up to 8000 x 8000 pixels.  2D/3D reconstruction can be performed using a single PC or using the 4-PC cluster in the BRC facility to enhance post-scan reconstructions times.

    Use and Management
    The purpose of this instrument is to support research at Boise State University and surrounding research facilities and is operated as a recharge instrument at an hourly rate. Scan times are dependent on specimen size and resolution parameters.

    [table “4” not found /]

    Contact Information
    Raquel Brown
    BRC Manager/Confocal Microscope System
    (208) 426-2125
    rbrown@boisestate.edu

    Publications and presentations utilizing data from samples imaged with the Skyscan MicroCT should include the following acknowledgement:  “This research was made possible by support from the Idaho State Board of Education’s Higher Education Research Council (HERC) and the Biomolecular Research Center at Boise State University.”